振源机械

Time:
Position:Home > Service area >
  • Problem:

    Plugging phenomena

  • Answer:

    Reason: Broken particle size exceeds the design granularity, or the machine can not be broken into materials, such as iron
    Solution: Change the input size or input quantity. Check whether there is material that can not be broken.

  • Problem:

    Broken teeth roll fever temperature is too high for some time after the normal operation

  • Answer:

    Reason: Lack of timely lubricated bearings, crusher has been in a state of overload
    Solution: Check the oil bearing chamber access patency. Adjust the feed volume, pressure reducing crusher

  • Problem:

    Motor functioning and broken teeth roll does not work

  • Answer:

    Reason: Safety pin split off, or fluid coupling melting fusible plug or plugs explosion destroyed
    Solution: Replace these parts.

  • Problem:

    Vibrating screen and the lower base have resonance phenomenon

  • Answer:

    Solution:
    1. Strengthening the foundation
    2. Increase the secondary shock
    3.Replace the spring

  • Problem:

    Vibrating screen out material running deviation

  • Answer:

    Solution: 1. Check whether the installation is level  2. Adjust the phase Angle of vibrating screen

  • Problem:

    Bad screening efficiency

  • Answer:

    1.Increase the amplitude 2. Transform into the feeding chute   3. Ensure uniform feeding  4.Replace screen plate

  • Problem:

    Vibrating screen can

  • Answer:

    Solution: 1.Check whether the rigid connection of external parts and vibration; 2.Check the driven part; 3,Check the motor ; 4.Check the vibrator

  • Problem:

  • Answer: